Neoego Bord NG
WiFi: 150.0 Mbps data rate with HT40
Bluetooth: BLE (Bluetooth Low Energy) and Bluetooth Classic
Processor: Tensilica Xtensa Dual-Core 32-bit LX6 microprocessor, running at 160 or 240 MHz
ROM: 448 KB (for booting and core functions)
SRAM: 520 KB (for data and instructions)
RTC fast SRAM: 8 KB (for data storage and main CPU during RTC Boot from the deep-sleep mode)
RTC slow SRAM: 8KB (for co-processor accessing during deep-sleep mode)
eFuse: 1 Kbit (of which 256 bits are used for the system (MAC address and chip configuration) and the remaining 768 bits are reserved for customer applications, including Flash-Encryption and Chip-ID)
Embedded flash: flash connected internally via IO16, IO17, SD_CMD, SD_CLK, SD_DATA_0 and SD_DATA_1 on ESP32-D2WD and ESP32-PICO-D4.
0 MiB (ESP32-D0WDQ6, ESP32-D0WD, and ESP32-S0WD chips)
2 MiB (ESP32-D2WD chip)
4 MiB (ESP32-PICO-D4 SiP module)
Peripheral interface with DMA that includes capacitive touch
ADCs (Analog-to-Digital Converter)
DACs (Digital-to-Analog Converter)
I²C (Inter-Integrated Circuit)
UART (Universal Asynchronous Receiver/Transmitter)
SPI (Serial Peripheral Interface)
I²S (Integrated Interchip Sound)
RMII (Reduced Media-Independent Interface)
PWM (Pulse-Width Modulation)
hardware accelerators for AES and SSL/TLS
Coding with the Arduino Interface or other C compatible, with the opportunity to run Micro-Python for AI.
Easy prototyping and enclosure of the Board. You project can be ready in minutes for commercial Application.
The solar panel + Lipo will give you full stand alone operation on the field with IOT and BLE data.